Emerson ControlWave MICRO Instruction Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 170
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
ControlWave Micro Instruction Manual (CI-ControlWave Micro)
1-2 Introduction Revised Jun-2013
3-, 4- and 8-slot base housings with 2-, 4-, or 8-slot I/O expansion
housings
Wide operating temperature range: (–40 to +70C) (–40 to 158F)
Variety of I/O modules (including mixed I/O) for cost-effective
small RTU applications
LED status indicators on the CPU, PSSM, and I/O modules
Lithium coin cell battery (located on the CPU module) provides
battery backup for the real-time clock and the system’s static RAM
(SRAM)
CE and Class I, Division 2 Hazardous Location approvals
1.1 Scope of the Manual
This manual contains the following chapters:
Chapter 1
Introduction
Provides an overview of the hardware and
general specifications for the ControlWave
Micro.
Chapter 2
Installation
Provides information on the base and expansion
housings, the Power Supply/Sequencer module
(PSSM), the CPU module, the Expanded
Communications module (ECOM), and related
peripherals such as the optional keypad.
Chapter 3
I/O Modules
Provides general information and wiring
diagrams for the I/O modules.
Chapter 4
Operation
Provides information on day-to-day operation of
the ControlWave Micro.
Chapter 5 Service and
Troubleshooting
Provides information on service and
troubleshooting procedures.
1.2 Physical Description
Each ControlWave Micro has a printed circuit board (PCB) backplane
mounted in an aluminum housing, a Power Supply/Sequencer Module
(PSSM), a CPU module, and—depending on the backplane and housing
size—from zero to six I/O modules. See Figure 1-1 Expansion housings
(in 2-, 4-, or 8-slot configurations) attach to the base housing and enable
you to add up to eight more I/O modules.
You can insert optional expansion communication modules (ECOMs) in
slots #3 and #4 of the base housing in place of I/O modules.
Refer to the following sections in this chapter or to other chapters in this
manual for further information:
Base and expansion housings (chassis) with backplanes (see Section
1.3 and Chapter 2)
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 169 170

Comments to this Manuals

No comments