Emerson ControlWave MICRO Instruction Manual download pdf (Page 119)

ControlWave Micro Instruction Manual (CI-ControlWave Micro)

Revised Jun-2013 Operation 4-1

Chapter 4 – Operation

This chapter provides general operational details for using the

ControlWave Micro.

In This Chapter

4.1 Powering Up/Powering Down the ControlWave Micro .................... 4-1

4.2 Setting Operating Mode (Run/Remote/Local or Mode Switch) ....... 4-2

4.3 Communicating with the ControlWave Micro .................................. 4-3

4.3.1 Default Comm Port Settings ................................................. 4-3

4.3.2 Changing Port Settings ........................................................ 4-4

4.3.3 Collecting Data from the ControlWave Micro ....................... 4-5

4.4 Creating and Downloading an Application (ControlWave Project) .. 4-5

4.5 Creating and Maintaining Backups .................................................. 4-6

4.5.1 Creating a Zipped Project File (*.ZWT) For Backup ............ 4-7

4.5.2 Saving Flash Configuration Parameters (*.FCP) ................. 4-8

4.5.3 Backing up Data ................................................................... 4-9

WARNING

EXPLOSION HAZARD

Substitution of components may impair suitability for use in Class I,

Division 2 environments.

When the ControlWave Micro is situated in a hazardous location, turn

off power before servicing or replacing the unit and before installing or

removing I/O wiring.

Do not disconnect equipment unless the power is switched off or the

area is known to be non-hazardous.

4.1 Powering Up/Powering Down the ControlWave Micro

The ControlWave Micro receives power from an external bulk power

supply into connector TB1. Chapter 2 includes instructions for wiring a

power supply to the ControlWave Micro.

To apply power to the ControlWave Micro, plug the power supply into

connector TB1 on the PSSM.

To remove power from the ControlWave Micro, unplug the power

supply from connector TB1 on the PSSM.

Figure 4-1. Connectors TB1 and TB2

TB2

TB1

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 169 170

No comments

Emerson ControlWave MICRO Instruction Manual Page 119