Emerson ControlWave MICRO Instruction Manual download pdf (Page 17)

ControlWave Micro Instruction Manual (CI-ControlWave Micro)

Revised Jun-2013 Installation 2-1

Chapter 2 – Installation

This chapter discusses the physical configuration of the ControlWave

Micro, considerations for installation, and instructions for setting

switches and jumpers on the CPU, PSSM, and ECOM modules.

In This Chapter

2.1 Site Considerations .......................................................................... 2-1

2.1.1 Class I, Div 2 Installation Considerations ............................. 2-2

2.2 Installation Overview ........................................................................ 2-2

2.2.1 Unpacking Components ....................................................... 2-3

2.2.2 Mounting the Housing .......................................................... 2-8

2.2.3 Grounding the Housing ........................................................ 2-9

2.3 Power Supply/Sequencer Module (PSSM) ................................... 2-10

2.3.1 General Information about the PSSM ................................ 2-10

2.3.2 PSSM Installation Overview ............................................... 2-12

2.3.3 Setting Jumpers on the PSSM ........................................... 2-12

2.3.4 Setting Mode Switch SW1 on the PSSM ........................... 2-13

2.3.5 General Wiring Guidelines ................................................. 2-13

2.3.6 Wiring a Bulk DC Power Supply to the PSSM ................... 2-14

2.3.7 Wiring an External Alarm or Annunciator to the Watchdog

Connector (OPTIONAL) ................................................... 2-15



2.4 CPU Module .................................................................................. 2-17

2.4.1 Setting Jumpers on the CPU Module ................................. 2-19

2.4.2 Setting DIP Switches on the CPU Module ......................... 2-20

2.4.3 Connections to RS-232 Serial Port(s) on CPU or ECOM .. 2-23

2.4.4 Connections to RS-485 Serial Port(s) on CPU or ECOM .. 2-26

2.4.5 Connections to Ethernet Port(s) on the CPU Module ........ 2-29

2.5 Expanded Communications Module (ECOM) ............................... 2-31

2.5.1 RS-232 Ports ...................................................................... 2-32

2.5.2 RS-485 Ports ...................................................................... 2-32

2.5.3 Modem Port (Type 1 ECOM only) ...................................... 2-33

2.6 Bezels ............................................................................................ 2-36

2.7 Optional Display/Keypads.............................................................. 2-37

2.1 Site Considerations

When choosing an installation site, check all clearances. Ensure that the

ControlWave Micro is accessible for wiring and service.

Caution

To ensure safe use of this product, please review and follow the

instructions in the following supplemental documentation:

 Supplement Guide - ControlWave Site Considerations for

Equipment Installation, Grounding, and Wiring (S1400CW)

 ESDS Manual – Care and Handling of PC Boards and ESD

Sensitive Components (S14006)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 169 170

Comments to this Manuals

No comments

Emerson ControlWave MICRO Instruction Manual Page 17

Comments to this Manuals

Related products and manuals for Power supply units Emerson ControlWave MICRO