Emerson ControlWave MICRO Instruction Manual download pdf (Page 127)

ControlWave Micro Instruction Manual (CI-ControlWave Micro)

Revised Jun-2013 Operation 4-9

2. Depending upon how your system is configured, the Flash

Configuration – Loading Options dialog box may open. If it

does, choose Load from device and wait for the utility to

retrieve all parameters from the ControlWave, then skip to step

4, otherwise, just proceed to step 3.

3. Click and wait for the utility to retrieve all

parameters from the ControlWave.

4. Click and specify a name for your FCP file,

then click Save. When the status line indicates successful

completion, your FCP file in done.

5. Copy the resulting FCP file to backup media (CD-ROM, thumb

drive, etc.) If you ever need to restore the FCP parameters to the

controller, establish communications with the unit, start the

Flash Configuration utility, and load the FCP file using the Read

from FCP button, then choose the Write to RTU button.

4.5.3 Backing up Data

You can back up certain types of data and restore it if needed. There are

other types of data that you can only collect, but you cannot restore.

 If you have certain variables that represent tuning parameters

(setpoints, for example) you can use tools such as the OpenBSI

DataView recipe feature to save those values to a recipe file on the

PC, and then restore them at a later time. See Chapter 8 of the

OpenBSI Utilities Manual (D5081).

 You can store the contents of read/write data arrays using the

OpenBSI Data Array Save/Restore utility. See Chapter 13 of the

OpenBSI Utilities Manual (D5081).

 You can collect alarms, and historical data (audit records, archive

files) but you cannot restore alarms or historical data.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 169 170

No comments

Emerson ControlWave MICRO Instruction Manual Page 127