Emerson GXT4 User's Guide download pdf (Page 26)

Operation and Display Panel

Liebert

GXT4

™

3.4.2 Default Screen

Press any button in the START SUCCESSFUL screen to enter the default interface, shown in

Figure 19.

Figure 19 Default screen

In the default screen, the LCD shows the UPS model, output parameters, input parameters, battery

capacity with run time estimate and load percentage. The UPS operation mode (online /inverter,

ECO, Battery or Bypass) will be indicated by the LED indicators.

If no control button (ESC, Up, Down, Enter) is pressed for 2 minutes, the LCD will enter the screen

saver mode (backlight turns off). It will remain off until a control button is pressed.

3.4.3 Main Menu Screen

Press the Enter button in the default screen to enter the MAIN MENU screen, as shown in

Figure 20.

Figure 20 Main Menu screen

To select a submenu, press the Up or Down button to move the cursor to the required item, then press

the Enter button to enter its submenu or set its parameter.

O/P: 120V 60HZ 11.7A

I /P: 120V 60HZ 13.1A

BATT: 100% 3MINS

LOAD: 100%

GXT4-UPS 3KVA

Values shown will vary

according to installation

and configuration.

1 STATUS

2 CONFIGURATION

3 CONTROL

4LOG

5 ABOUT

6NETWORK

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

No comments

Emerson GXT4 User's Guide Page 26