Emerson GXT4 User's Guide download pdf (Page 21)

Installation

15 Liebert

GXT4

™

2.5.2 Connecting Battery Cables

1. Switch Off the input breaker of the battery cabinet.

2. Take out the battery cable included with the battery cabinet.

3. Connect one end of the battery cable to the external battery connector on the rear panel of the

UPS, and connect the other end to any battery port on the rear panel of the battery cabinet.

4. Switch On the battery breaker on the rear of the external battery cabinet.

5. Use the Configuration Program included with the UPS to specify the number of external battery

cabinets connected to the Liebert GXT4. See Table 17 for approximate battery run times.

Figure 13 Battery cable attachment

2.6 Connecting Communication Cables

Communication cable connection includes: USB and cables for option cards.

2.6.1 Connecting USB Communication Cables

1. Take the USB communication cables out of the accessories bag.

2. Insert one end of the USB communication cable to the USB port on the rear panel of the Liebert

GXT4 (see Figures 2 and 1.4).

3. Insert the other end of the USB communication cable to the USB port of the computer.

2.6.2 Installing the Optional Liebert IntelliSlot

Card and Communication Cables

1. Remove the protective cover of the Liebert IntelliSlot port on the Liebert GXT4 and set it aside.

2. Insert the Liebert IntelliSlot card into the Liebert IntelliSlot port and secure it with screws.

3. To connect any cable associated with a Liebert IntelliSlot card, refer to the user manual provided

with the card.

To configure and use the Liebert IntelliSlot communication card, refer to the card’s user manual.

Manuals for the various Liebert IntelliSlot cards are available at Liebert’s Web site:

www.liebert.com

Liebert

GXT4

External

Battery

Cabinet

Battery Cable

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

No comments

Emerson GXT4 User's Guide Page 21