Emerson CF3300ORH Owner's Manual download pdf (Page 8)

How to Wire Your Ceiling Fan

If you feel that you do not have enough electrical

wiring knowledge or experience, have your fan

installed by a licensed electrician.

1. Connect the green grounding lead from the hanger

ball and the green grounding lead from the hanger

bracket to the grounding conductor of supply (this

may be a bare wire or wire with green colored

insulation). Securely connect wires with wire

connectors supplied. (Figure 10.)

This product is designed to use only those

parts supplied with this product and/or any

accessories designated specifically for use

with this product by Emerson Electric Co.

Substitution of parts or accessories not

designated for use with this product by

Emerson Electric Co. could result in personal

injury or property damage.

WARNING

U.L. Model No.: CF3300

2. Securely connect the fan motor white wire to the

supply white (neutral) wire using wire connector

supplied (Figure 10). Securely connect the fan

motor black wire to the supply black (hot) wire

using wire connector supplied (Figure 15). The

blue wire is for optional light kit accessory. Do not

connect the blue wire to the supply black wire. Cap

the blue wire with a wire connector supplied. After

connections have been made, turn leads upward

and carefully push leads into the outlet box, with

the white and green leads on one side of the outlet

box and the black and blue leads on the other side

of the outlet box.

To avoid possible electrical shock, be sure

electricity is turned off at the main fuse box

before wiring.

NOTE: If you are not sure if the outlet box is

grounded, contact a licensed electrician for

advice, as it must be grounded for safe

operation.

WARNING

SMALL

BARREL

BUSHING

FAN

CABLE

LARGE BRASS

BARREL NUT

FAN CABLE

LARGE BRASS

BARREL NUT

5/32"

SCREW (2)

PASS THE FAN CABLE THROUGH

THE LOOP AND BACK INTO THE

SMALL BARREL BUSHING

LOOP THE CABLE

BACK INTO THE

LARGE BARREL

NUT

FAN CABLE

LARGE BRASS

BARREL NUT

5/32" SCREW (2)

Figure 9A

Figure 9B

9. Insert the support cable back through the same

hole of the large brass barrel nut in the opposite

direction as the first pass (Figure 9A). Pull the

cable tight, removing as much slack as possible

(Figure 9A).

10.Fully tighten the 5/32 phillips head screw on the

brass barrel nut to secure the fan cable in position.

SUPPLY

GROUND

WIRE

LISTED

WIRE

CONNECTOR (3)

GREEN WIRE

(GROUND) FROM

HANGER BRACKET

GREEN WIRE

(GROUND) FROM

HANGER BALL

WHITE SUPPLY

(NEUTRAL)

WHITE FAN

WIRE

BLACK SUPPLY (HOT)

BLACK

FAN WIRES

THREADED

STUD (2)

NOTE: CEILING COVER

OMITTED FOR CLARITY.

Figure 10

11.Pass the free end of the support cable through the

second hole on the large brass barrel nut and pull

the cable as tight as possible. Fully tighten the

second 5/32” phillips head screw into the end of

the brass barrel nut to secure the cable in position

(Figure 9B).

12.Cut off and discard the excess fan cable

protruding from the brass barrel nut (Figure 9B).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Emerson CF3300ORH Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Household fans Emerson CF3300ORH