Emerson CF3300ORH Owner's Manual download pdf (Page 2)

WARNING

WARNING: To avoid fire, shock, and serious personal injury, follow these instructions.

Safety Instructions

1. Read your owner’s manual carefully and keep it for future reference.

2. Before servicing or cleaning unit, switch power off at service panel and lock service panel

disconnecting means to prevent power from being switched on accidentally. When the service

disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the

service panel.

3. Be careful of the fan and blades when cleaning, painting, or working near the fan. Always turn off

the power to the ceiling fan before servicing.

4. Do not put anything into the fan blades while they are turning.

5. Do not operate reversing switch until fan blades have come to a complete stop.

Additional Safety Instructions for Installation

1. To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not

operate fan without blades.

2. All wiring must be in accordance with the National Electrical Codes “ANSI/NFPA 70-1999” and

Local Electrical Codes. Use the National Electrical Code if Local Codes do not exist. The ceiling

fan must be grounded as a precaution against possible electrical shock. Electrical installation

should be made or approved by a licensed electrician.

3. The fan mounting bracket must be surely mounted and capable of reliably supporting at least 100

lbs. Outlet boxes are not acceptable for fan support. See Page 6 of owner’s manual for support

requirements. Consult a qualified electrician if in doubt.

CAUTION: To reduce the risk of personal injury, mount the fan base to a ceiling joist or structural

member using the hardware provided with your fan.

WARNING: Support Directly from Building Structure.

4. The fan must be mounted with the fan blades at least 7 feet from the floor to prevent accidental

contact with the fan blades.

5. Follow the recommended instructions for the proper method of wiring your ceiling fan. If you do

not know enough about electrical wiring, have your fan installed by a licensed electrician.

WARNING: To avoid fire, shock or injury, do not use an Emerson or any other brand of control not

specifically approved for this fan.

WARNING: This product is designed to use only those parts supplied with this product and/or any

accessories designated specifically for use with this product by Emerson Electric Co. Substitution

of parts or accessories not designated for use with this product by Emerson Electric Co. could

result in personal injury or property damage.

WARNING: To reduce the risk of personal injury, do not bend the blade flange when installing the

blade flanges, balancing the blades or cleaning the fan. Do not insert foreign objects in between

rotating fan blades.

NOTE: This fan is suitable for use with solid-state speed controls.

WARNING: To reduce the risk of fire or electric shock, this fan should only be used with fan speed

control SW22, manufactured by Rhine Electric Co., Ltd.

WARNING: To reduce the risk of electrical shock, this fan must be installed with an isolating

wall control/switch.

WARNING: To reduce the risk of fire, electric shock, and injury to persons, ceiling fan must be

installed with fan blades and light kits that are marked to indicate the suitability with this model.

Other blades and light kits can not be substituted.

DATE CODE:

The date code of this fan may be found on the box, stamped in ink on a white label.

You should record this data above and keep it in a safe place for future use.

U.L. Model No.: CF3300

1 2 3 4 5 6 7 ... 15 16

Comments to this Manuals

No comments

Emerson CF3300ORH Owner's Manual Page 2

Comments to this Manuals

Related products and manuals for Household fans Emerson CF3300ORH