Emerson Liebert Remote Monitoring Panel User Manual download pdf (Page 2)

IMPORTANT SAFETY INSTRUCTIONS

NOTE

Read this entire manual before installing or operating the system.

WARNING

The shipping bands may be under tension. use appropriate eye, face, and hand protection to

safeguard against injury from band backlash.

WARNING

Verify that all incoming line voltage (power) circuits are de-energized and locked out before

installing cables or making connections in the unit.

Equipment inspection and startup should be performed only by trained personnel. Lethal

voltages are present during startup procedures. Electrical safety precautions must be

followed throughout inspection and startup.

Only qualified service personnel should perform maintenance on the remote distribution

cabinet. All voltage sources to the unit must be disconnected before inspecting or cleaning

within the cabinet.

Lethal voltages exist within the equipment during operation. observe all warnings and

cautions in this manual. Failure to comply may result in serious injury or death. Obtain

qualified service for this equipment as instructed.

NOTE

The unit should NOT be loosened from the shipping pallet until after all handling by forklift or

pallet jack is completed.

All power wiring should be installed by licensed electricians and must comply with the NEC

and applicable codes.

1 2 3 4 5 6 7 ... 35 36

No comments

Emerson Liebert Remote Monitoring Panel User Manual Page 2