Emerson Liebert ICOM-DO User Manual download pdf (Page 12)

Liebert iCOM Display Components and Functions

Accessing Submenus on Small Displays

While viewing the menu you wish to access (User, Service or Advanced), use the up and down arrow

keys to scroll through the icons page-by-page. To scroll through the icons one-by-one, press the enter

key and then use the up and down arrow keys. With the desired icon highlighted, press the enter key

to enter that submenu. Once in a Submenu, a list of parameters is displayed.

Press the enter key and use the up and down arrow keys to scroll through the parameters one-by-one.

Pressing the Esc key will go back a level. Figure 5 shows the Liebert iCOM control menus for a small

display.

Accessing Submenus on Large Displays

While viewing the menu you wish to access (User, Service or Advanced), press the enter key to high-

light the first icon. Use the arrow keys to navigate through the icons. With the desired icon high-

lighted, press the enter key to enter that submenu. Once in a Submenu, a list of parameters will be

displayed.

The up and down arrow keys may be used to scroll through the parameters page-by-page if the sub-

menu has multiple pages. To scroll item-by-item, press the Enter key and then use the up and down

arrow keys. Using the right or left arrow keys on large displays attached to a network will change the

unit being viewed. Pressing the Esc key will go back a level. Figures 7 and 8 show the Liebert iCOM

control menus for a stand-alone large display and for a networked large display, respectively.

2.1.3 Entering a Password

To change the value of a parameter in a menu, you must first enter the password for that menu. The

User, Service and Advanced menus each has a unique password to prevent unauthorized changes.

The User menu password is 1490; the Service menu password is 5010.

To enter a password:

1. Navigate to the menu that contains the parameter to be changed.

2. Select Password in the submenu by pressing the Enter key

3. Press the Enter key to move your cursor to the right side of the screen to select the question

marks.

4. Use the arrow keys to enter the numeral for the password’s first digit (the up arrow key moves

from 1 to the next digit).

5. Use the right arrow key to move to the next question mark and repeat Step 4 to enter all digits in

the password.

6. After entering the password, press enter.

If the password is correct, the Actual Level shown to the right of Password will change

from 0 to 1 or 2. The menu will remain locked if the password was incorrect.

NOTE

Settings are readable without a password, but changing settings requires a password.

NOTE

Entering the Service menu password permits access to both the User and Service menus.

NOTE

Returning to the Status menu will require re-entering a password to make changes.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 99 100

No comments

Emerson Liebert ICOM-DO User Manual Page 12