Emerson AVOCENT User's Guide download pdf (Page 32)

Setting Description

Auto Login

When enabled, a specified user is automatically logged into the

receiver whenever it is turned on and physically connected to a

switch in the system.

Auto Login Username

When Auto Login is enabled, this identifies the user that will be

logged in to the receiver.

Auto Connect

After a user logs into this receiver (either manually or because of an

auto login), the receiver will automatically connect a KVM session to

a specified target.

Auto Connect Target

When Auto Connect is enabled, this identifies the target to which

the receiver will be automatically connected.

Auto Connect Mode

When Auto Connect is enabled, this option determines the mode

(Shared or Private) that will be used for the connection.

USB Mode

Determines what USB devices will be extended from this receiver

to a target.

LCD Backlight Determines whether the LCD backlight will be on or off.

Allowed Access

Determines the type of connections this receiver can establish

(Shared, Private or either).

Video Scaling

If enabled, the video will be scaled to match the resolution of the

attached monitor if the target is outputting a different resolution.

Audio Output

Controls whether any audio output from the target is used to drive

the green audio output jack on the receiver.

Microphone

Controls whether any signal from the pink microphone jack on the

receiver is sent over the KVM session to the connected target.

Keyboard Auto Enumeration

If enabled, the keyboard will be re-enumerated when connecting to

a target.

Mouse Auto Enumeration

If enabled, the mouse will be re-enumerated when connecting to a

target.

Session Timeout

If there is no keyboard or mouse activity for this amount of time, the

KVM session will be terminated and the user logged out of the

receiver.

Share control timeout

When the keyboard and mouse are idle for this amount of time,

another user on a shared KVM session can gain control of the

keyboard and mouse.

Table3.2:ReceiverSettingsDescriptions

Toeditthereceiversettings:

1. Selectareceiverfromthelistofdevices.

2. OntheSettingstabthereareseveraloptionsthatcanbeenabledordisabled,usethedrop-downmenusto

configurethoseoptions.

NOTE:When some options are enabled, they may require additional information. For example, auto login will require a username.

3. ClickSave.

Receiver–Statustab

TheStatustabdisplaysthereceiverserialnumber,EID,statusandportnumber.

24Avocent® Matrix High Performance KVM Switching System Installer/User Guide

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 50 51

Comments to this Manuals

No comments

Emerson AVOCENT User's Guide Page 32

Comments to this Manuals

Related products and manuals for Network switches Emerson AVOCENT