Emerson ASCO 5350 Eight-Channel Remote Annunciator Installation Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
ASCO 5350 Installation Manual
381333-315 D ASCO Power Technologies Page 5
ATS Remote Annunciator
Configuration
The ATS Remote Annunciator must be configured. First log
in. The ATS Remote Annunciator sends HTML files to the
client computer. Internet Explorer interprets these HTML
files, formats them, and displays the embedded web pages to
the user.
1 Login Screen
To login follow these steps:
1. Be sure that the computer is still connected to the Ethernet
switch (LAN).
2. Start the Internet Explorer browser on the computer.
3. In the address bar, type in the default address of the ATS
Remote Annunciator, then press Enter:
http://169.254.1.200
4. The ATS Remote Annunciator login page should appear.
Enter the default Login ( admin ) and Password ( ASCO )
from the label (see page 2) and click Login. See Figure 4.
Figure 4: Login screen
2 Annunciator Configuration
5. On the left pane, under Configurations, click Annunciator
to configure the ATS Remote Annunciator. See Figure
5.
click
Figure 5: Configurations > Annunciator
6. The Configurations > Annunciator screen appears. See
Figure 6. The configurations features are:
Annunciator name, software upgrade, IP address, subnet
mask, gateway address, port, encryption, buzzer mode.
Figure 6: Configurations > Annunciator
2-1 Annunciator Name
Enter a name for the ATS Remote Annunciator.
Also write the name here _____________________________.
2-2 Software Upgrade
Write the software version here ________________________.
The firmware in the ATS Remote Annunciator can be
upgraded. Before upgrading, write down all configuration
settings of the ATS Remote Annuciator. These settings may
have to be made after the upgrade is completed.
1. Write down all configuration settings.
2. Click Browse, then click the file with .spb extension.
3. Click Upgrade. See Figure 7.
Figure 7: Firmware update screen
Before updating the firmware, write down all
configuration settings.
NOTIC
E
Page view 4
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments