Emerson Liebert GXT3 User Manual download pdf (Page 34)

Maintenance

6.3 Precautions

Although the Liebert

GXT3

™

has been designed and manufactured to ensure personal safety,

improper use can result in electrical shock or fire. To ensure safety, observe the following precautions:

• Turn Off and unplug the Liebert GXT3 before cleaning it.

• Clean the UPS with a dry cloth. Do not use liquid or aerosol cleaners.

• Never block or insert any objects into the ventilation holes or other openings of the UPS.

• Do not place the Liebert GXT3 power cord where it might be damaged.

6.4 Checking UPS Status

Emerson recommends checking the UPS operation status every six months.

• Check whether the UPS is faulty: Is the Fault Indicator On? Is the UPS sounding an alarm?

• Check whether the UPS is operating in Bypass Mode. Normally, the UPS operates in Normal

Mode. If it is operating in Bypass Mode, stop and contact your local Emerson representative, or

Emerson Channel Support.

• Check whether the battery is discharging. When the mains input is normal, the battery should

not discharge. If the UPS is operating in Battery Mode, stop and contact your local Emerson rep-

resentative or Emerson Channel Support.

6.5 Checking UPS Functions

Emerson recommends checking the UPS functions once every six months.

Back up the load data before conducting the UPS functions check. Procedures are as follows:

1. Press the Standby/Manual Bypass button to check whether the buzzer and indicators are normal.

2. Press the On/Alarm Silence/Manual Battery Test button to check again whether the indicators

are On and the UPS is operating normally.

3. Press the On/Alarm Silence/Manual Battery Test button for three seconds after Inverter Mode.

The UPS should initiate a battery self-test. Check to determine whether the battery is operating

normally. If not, stop and contact your local Emerson representative or Emerson Channel Support

NOTE

UPS function check procedures may interrupt power supply to the connected load.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 45 46

No comments

Emerson Liebert GXT3 User Manual Page 34