Emerson FXMP25 User's Guide Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 116
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
20 Mentor MP Short Form Guide
www.leroy-somer.com Issue : c
Place finger-guard on a flat solid surface and hit relevant break-outs with hammer as
shown (1). Continue until all required break-outs are removed (2). Remove any flash /
sharp edges once the break-outs are removed.
3.3 Mounting method
The Mentor MP can only be surface mounted.
Figure 3-3 Overall size 1A dimensions
1. The two outer holes must be used for mounting the Mentor MP.
.
293mm (11.54in)
250mm (9.84in)
444mm
(17.48in)
222mm
(8.74in)
95mm
(3.74in)
222mm (8.74in)
170mm (6.69in)
6.5mm (0.26in)
250mm (9.84in)
40mm
(1.58in)
22mm
(0.87in)
380mm
(14.96in)
4 holes to
suit M6
1
1
1
1
MA1
MA2
With the SMARTCARD installed to the drive, the depth measurement increases by
7.6mm (0.30 in).
Fans are only installed to the MP75A4(R) and MP75A5(R)
NOTE
NOTE
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 115 116

Comments to this Manuals

No comments