Emerson Liebert Remote Monitoring Panel User Manual download pdf (Page 6)

Introduction

1.0 INTRODUCTION

The Liebert NX Remote Monitoring Panel (RMP) is designed as a remote user interface to monitor

Liebert NX Uninterruptible Power Systems. The RMP monochrome liquid crystal display measures

122 x 92mm (4.8 x 3.6 inches). It reports the same data and status and alarm messages that are

shown by the LCD on the UPS’s door. The RMP does not offer control of the UPS.

The RMP should be installed in a room where it is readily and easily observed by personnel, such as

facility and maintenance staff. This type location enhances the unit’s capacity to provide notice if a

status change or alarm requires an electrician or a UPS technician's intervention.

The RMP can monitor only one Liebert NX UPS. If there are multiple Liebert NX UPSs, an RMP will

need to be installed for each unit. For parallel systems, the system load information may be viewed

via the system screen from any RMP that is connected to a UPS in that system (see 3.6 - Detailed

Description of Menu Items.)

Figure 1 Remote Monitoring Panel components and functions

98101211

F1 F2 F3 HELPF4

14 15

11-21/32"

(296mm)

11-13/32"

(290mm)

15-53/64" (402mm)

4-41/64"

(118mm)

4-15/16"

(100mm)

15-3/4" (400mm)

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

Emerson Liebert Remote Monitoring Panel User Manual Page 6