Emerson XEV22D Specifications download pdf (Page 13)

How to Assign a MODBUS Address User Interface • 7

7.7. How to Assign a

MODBUS Address

1. To enter the programming mode, press and hold the

SET and DOWN arrow keys together for about

three (3) seconds or until the dots at the top of the

display start flashing.

2. Arrow down to PR2 and press SET to select.

3. PAS for password will display and flash.

4. Use the arrow keys to set the 321 password. Press

SET to save.

5. Use the arrow keys to scroll through and locate

nod. Press SET. Use the arrow keys to scroll

through and locate Std. Press SET.

6. Use the arrow keys to scroll through and locate

Adr. Press SET. Use the arrow keys to choose the

address number of the device. Press SET to save.

7. To exit, press the SET and UP arrow keys together

or wait 15 seconds without pressing a key.

NOTE: If a time-out occurs while setting the

password (PR2 flashes), press SET to resume

entering the password.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

No comments

Emerson XEV22D Specifications Page 13