Emerson 1F98EZ-1421 User's Guide download pdf (Page 16)

16

When programming your thermostat, you

may copy the program from one day to

another day or to all six other days.

To copy a program from one day to all

other days:

1. In Set Schedule mode, enter the pro-

gram for the day or select the day you

wish to copy by touching the Advance

Day key.

2. Touch the Copy key. The day of the

week that will be copied is on and the

other days of the week will be ﬂash-

ing. The scrolling message will show

“COPY EVERY DAY”

3. Touch the Copy

key again. The scroll-

ing message will change to “MORN-

ING”. The day you copied will remain

on.

4. Touch the Run Schedule key to return

to normal operation.

To copy a program from one day to

another day:

1. In Set Schedule mode, enter the pro-

gram for the day or select the day you

wish to copy by touching the Advance

Day key.

2. Touch the Copy key. The day of the

week that will be copied is on and the

other days of the week will be ﬂash-

ing. The scrolling message will show

“COPY EVERY DAY”

PROGRAMMING YOUR THERMOSTAT

This thermostat is set up for 7 independ-

ent day programming with 4 time/tem-

perature periods per day.

The Heating and Cooling Worksheet on

page 17 allows you to pencil in your own

program times and temperatures. Factory

settings are listed on Monday (for Mon-

day thru Friday), Saturday and Sunday.

If you are re-programming all 7 days, ﬁll

in all lines with the times and tempera-

tures you want. Use this worksheet as a

guide to reprogram the thermostat.

Keep the following guidelines in mind

when planning your program.

s )N(EATINGLOWERTEMPERATURESWILL

save energy.

s )N#OOLINGHIGHERTEMPERATURESWILL

save energy.

s )FYOUPLANONUSING!UTO#HANGEOVER

do not program the heating tempera-

tures higher than those for cooling.

Planning Your Program –

Important

Programming Tips:

Copy Program

PROGRAMMING

1 2 ... 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments