
ISE IN-SINK-ERATOR INSTALLATION, CARE AND USE INSTRUCTIONSMODELS W-152 and W-154 IMPORTANT SAFETY INSTRUCTIONS this manual. Whe
2 SPECIFICATIONS * STANDBY HEAT LOSS - Measure of how well the tank is insulated. Use a Kilowatt Hour meter and measure the power consumed in a 24
installation TEXT PRINTED OR OUTLINED IN RED CONTAINS INFORMATION RELATIVE TO YOUR SAFETY. PLEASE READ THOROUGHLY BEFORE USING APPLIANCE. REQUIRED AB
4 heater's rating plate. Pressure rating of relief valve must not exceed the working pressure shown on the rating plate of the heater and the A.G
5 ELECTRICAL CONNECTIONS The water heater is equipped with a 3-1 /2 ft. power cord and a grounded type three pin plug. Plug cord into a grounded 120 V
6 checklist ALWAYS REMOVE THE POWER CORD FROM ITS RECEPTACLE BEFORE SERVICING THE HEATER. IF THE HEATER STOPS WORKING: 1. Check the circuit breaker
7 wiring diagram heater dimensions IMPORTANT THE CORD OF THIS HEATER MUST BE USED WITH A PROPERLY GROUNDED OUTLET TO INSURE PROPER SAFETY AND OPERAT
IN-SINK-ERATOR FULL RESIDENTIAL WATER HEATER WARRANTY FULL ONE-YEAR WARRANTY IN-SINK-ERATOR wa
Comments to this Manuals