Bulletin 71.2:299H
3
3/4 NPT
CONTROL LINE
Figure 2. 299H Series Sectional Views
Features
• Compact in Size—Small envelope because of the
built-in pilot and internal registration.
• Unique No Bleed Monitor System—Flexible
worker/monitor system setup that allows for
bleed to be piped to the intermediate piping thus
eliminating downstream bleed which reduces lost
and unaccounted for gas. Another advantage of this
conguration is that the system lockup pressure is
that of the worker instead of the monitor.
• Not an Adaptation of Existing Regulators—
New design of integrated cases and internal
registration ports.
• Wide Variety of Applications—Natural gas
distribution systems, gas supply to industrial
boilers, furnaces, ovens, mixers, plant air service.
• Highest Quality— Designed and manufactured to
ISO 9001 standards.
• Accuracy—Keeps constant inlet pressures to
downstream equipment by accurately controlling
distribution system pressures at widely varying ow
rates and supply pressures for maximum efciency
and best operation or by eliminating the need for
pressure-compensating meters by holding a steady
pressure to the meter inlet.
• Optional Token Relief—The Types 299HR and
299HSR with an integral token relief in the pilot is
designed to relieve minor overpressure caused by
thermal expansion.
• High-Capacity Pressure Control—Actuator
diaphragm responds quickly to downstream
pressure change, causing immediate correction in
W7527-1
TYPE 299H WITH EXTERNAL REGISTRATION TYPE 299HR PILOT WITH OPTIONAL TOKEN RELIEF
W7528-1
main valve position. Pilot responds simultaneously
and controls nal positioning of main valve. This
action permits full main valve travel, resulting in
higher capacity than could be obtained without an
external pilot regulator.
• Easy Registration Conversion—Two screws and
O-rings change internal registration to external or
dual registration.
• Easy Startup—No special procedure required.
• Easy to Maintain—Main valve disk and orice can
be inspected without removing body from pipeline.
Easy access two bolt ange permits quick removal
of actuator and pilot from body.
• Economical, Labor-Saving Installation—Supply
pressure to pilot is factory-piped directly from inlet
side of main regulator body, thus requiring no
upstream pilot supply line on standard installations.
• Rugged Construction—With a two bolt connection
of the regulator to the body and no union ring, the
299H Series regulators are designed for longer
service life with minimal maintenance requirements.
• No gaskets—Reusable O-rings at all
serviceable joints.
• Startup Protection—The main valve and the pilot
are designed with reverse pressure mechanisms to
prevent damage during startup or sudden increase
in downstream pressure.
• Fewer Parts—Fewer recommended parts needed
for spare parts inventory.
(2 pages)
(1 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals