
42 FXMP25 User Guide
www.controltechniques.com Issue Number: 3
Indicates the last four field controller trips.
This parameter defines which parameter is displayed at power up. When the field
controller enters status mode this parameter is also displayed.
Used to define the unique address for the field controller for the serial interface. The
field controller is always a slave.
Addresses between 0 and 247 are permitted. Address 0 is used to globally address all
slaves, and so this address should not be set in this parameter.
Used to define the baud rate of the serial interface.
90 Trip 0
91 Trip 1
92 Trip 2
93 Trip 3
Coding
Bit FI Txt VM DP ND US RW BU PS
11 11
Range 0 to 255
Update rate Background write
94 Parameter displayed at power-up
Coding
Bit FI Txt VM DP ND US RW BU PS
111
Range 00 to 98
Default 54
Update rate Background read
95 Serial address
Coding
Bit FI Txt VM DP ND US RW BU PS
111
Range 0 to 247
Default 1
Update rate Background read
96 Baud rate
Coding
Bit FI Txt VM DP ND US RW BU PS
1111
Range 0 to 4
Default 3
Update rate Background read
Parameter value String/baud rate
02400
14800
29600
3 19200
4 38400
Comments to this Manuals