Emerson USB Fieldbus Interface User Manual download pdf (Page 45)

No device detected dialogFigure 7-3:

Click OK and check for the following:

• Make sure the fieldbus device or segment is powered either by an external

source or by the USB Fieldbus Interface. For more information, see

Section 2.3.

• Make sure drivers are installed and that the hardware is ready for use.

If automatic driver installation fails, install drivers manually. For more

information, see Appendix D.

• Check that there are no loose connections and that the USB cable does not

exceed 2 meters in length.

• Make sure the USB FF HSE Server is running.

May 2014 User's Manual

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 58 59

No comments

Emerson USB Fieldbus Interface User Manual Page 45