Emerson MONITORING OpenComms User Manual download pdf (Page 29)

Firmware Updates

Once the last file is downloaded, the screen below right will appear.

Repeat Steps 2 through 4 to change

the baud rate back to 9600 bps as

show in the illustration below right.

After the communication settings are

adjusted, hit the Enter key on your

keyboard. The screen at right will

appear.

You can also cycle power on the Open-

Comms NIC-485. This action will also

initiate communication and provide

information on current revision sta-

tus. Once the “Initializing Net-

work…” line appears, hit the Enter

key on your keyboard.

Select X and the card will reboot.

To ensure that the latest firmware is

downloaded to the OpenComms

NIC-485, cycle power by removing

and restoring the power connection at

TB3. The information below will

appear.

NOTE

The information above, such as version values and numbers,

will change as Liebert releases new firmware.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

No comments

Emerson MONITORING OpenComms User Manual Page 29