Emerson CSI 9420 User Manual Page 5
- Page / 10
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
1
2
3
4
Input
■
Accelerometer 1
- DC Bias Range: 2 - 3 Vdc
- DC Input Range: 0 - 5 Vdc
- AC Input Range: + 2.5 Vpeak
(100 gs peak)
■
Accelerometer 2
- DC Bias Range: 2 - 3 Vdc
- DC Input Range: 0 - 5 Vdc
- AC Input Range: + 2.5 Vpeak
(100 g’s peak)
■
Temperature 1
- DC Bias Range: N/A
- DC Input Range
-22° F to 302° F (-30° to + 125° C)
- AC Input Range: N/A
Ouput
■
HART enabled, wireless, linear with
velocity, temperature, and/or PeakVue
■
The overall velocity measurement
delivered over the 2Hz-1000Hz
frequency range per the ISO 10816
standard.
■
The PeakVue value delivered as peak-
to-peak acceleration value based on a
1000Hz high-pass filter
Local Display
■
The optional five-digit integral LCD
Meter can display engineering units
(°F, °C, In/Sec, mm/sec and g’s).
Display updates at transmit rate up to
once per minute
Humidity Limits
■
0–100% relative humidity
Temperature Limits
■
Without LCD Meter Display
Operating Limit Storage Limit
-32° F to 185° F -32° F to 185° F
-40° C to 85° C -40° C to 85° C
■
With LCD Meter Display
Operating Limit Storage Limit
-4° F to 185° F -32° F to 185° F
-20° C to 85° C -40° C to 85° C
Transmit Rate
■
User selectable, 1 min to 60 min
A0394 Sensor Series
■
Nominal Sensitivity
25 mV/g (2.5mV/(m/s
2
)
■
Frequency Range
96 to 600k cpm (1.6 to 10k Hz)
■
Amplitude Range
± 80 g (± 784 m/s
2
)
■
Broadband Resolution
3 mg rms (29 mm/s
2
rms)
■
Settling Time
≤ 2 sec (≤ 2 sec)
■
Temperature Range
-65 to +250° F (-54 to +121° C)
■
Connector Position
Side (Side)
■
Weight
0.81 oz (23 gm)
Functional Specifications
ElectroMagnetic Compatibility (EMC)
■
All Models meets all relevant
requirements of EN 61326.
Measurement Accuracy
■
Parameter - Typical
2
- RMS Velocity +/- 0.4 dB
(Corresponds to +/-4%)
- PeakVue +/- 0.4 dB
(Corresponds to +/- 4%)
- Temperature +/- 4° C
NOTE: (1) Measurement accuracy is the absolute accuracy of
the measurement relative to a known, calibrated excitation for
WirelessHART devices.
(2) Typical measurement accuracy represents the expected
performance operating under steady-state conditions (constant
temperature at 20°C with no external interference) for a mid-band
excitation (nominally 1 g at 100 Hz). This variation includes the
frequency response of the electronics and the sensor
Measurement Precision
■
Vibration: +/- 0.2 dB over 24 months
■
Temperature: +/- 2 °C over 24 months.
Self Calibration
■
The analog-to-digital measurement
circuitry automatically self-calibrates for
each update by comparing the dynamic
measurement to extremely stable and
accurate internal reference elements
Vibration Effect
■
No loss in functionality when tested per
the requirements of IEC60770-1 with
high vibration level (10 Hz to 10 Khz)
and up to 50g acceleration
Sensor Connections
Connecting One Sensor to the CSI 9420
■
Connecting One Sensor / accelerometer
- Connector labeled 1 - Red wire
- Connector labeled 2 - White wire
- Connector labeled 3 - Blank
- Connector labeled 4 - Black wire
Connecting Two Sensors to the
CSI 9420
■
Connecting Two Sensors /
accelerometer
- Connector labeled 1 - Two red wires
(one from each sensor)
- Connector labeled 2 - White wire from
one sensor
- Connector labeled 3 - White wire from
other sensor
- Connector labeled 4 - Two black wires
(one from each sensor)
Connecting One Sensor with
Temperature to the CSI 9420
■
Connecting One Sensor accelerometer
with temperature
- Connector labeled 1 - Red wire
- Connector labeled 2 - White wire
- Connector labeled 3 - Green wire
- Connector labeled 4 - Black wire
Performance Specifications
Wireless Power Module
■
Replaceable, intrinsically safe
Lithium-Thionyl Chloride power module
pack with PBT enclosure
■
Power Module life – Transmit Rate
- Active LCD Panel
3.5 years : 30 minute transmit rate
6 years: 60 minute transmit rate
- No LCD Panel
4 years: 30 minute transmit rate
7 years: 60 minute transmit rate
Sensor Terminals
■
Screw terminals permanently fixed to
terminal block
HART Communicator Connections
Communication Terminals
■
Clips permanently fixed to terminal
block
Materials of Construction
Enclosure
■
Housing - Low-copper aluminum
■
Paint - Polyurethane
■
Cover O-ring - Buna-N
Terminal Block and Battery Pack
■
PBT
Antenna
■
PBT/PC integrated omni directional
antenna
Mounting
■
Transmitters may be attached away
from the asset to be monitored with the
sensors mounted directly to the asset
■
Mounting brackets also permit remote
mounting. See the “Dimensional
Drawings” section
Weight
■
CSI 9420 without LCD - 4.6 lbs. (2 kg)
■
CSI 9420 with M5 LCD - 4.7 lbs (2.1 kg)
Enclosure Ratings (9420)
■
Housing option code D is NEMA 4X,
and IP66
(1) Reference conditions are for one accelerometer connected at 70°
F (21° C), and routing data for three additional network devices.
NOTE: Continuous exposure to ambient temperature limits (-40 °F
or 185 °F) (-40 °C or 85 °C) may reduce specified battery life by less
than 20 percent.
Physical Specifications
Product Data Sheet
January 2009
Page 5
- Machinery Health 1
- Management 1
- Wireless Architecture 3
- Overview 3
- Product Data Sheet 3
- Are You Wireless? 4
- Functional Specifications 5
- Performance Specifications 5
- Physical Specifications 5
- Dimensional Drawings 7
- CSI 9420 Remote Mount 7
- CSI 9420 Dimensions 7
- Sensor Ordering Information 9
- Destination Country Code 9
Related products and manuals for Measuring, testing & control Emerson CSI 9420
(156 pages)Reliance Water Heaters 184735-000 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Grzejniki wodne i kotły Reliance Water Heaters 184735-000.
Dostarczamy 1 pdf podręczników Reliance Water Heaters 184735-000 do pobrania za darmo według typów dokumentów: Instrukcja Obsługi
Comments to this Manuals