912N Series
D100317X012
Instruction Manual
Form 5124
June 2010
!
This manual provides installation, maintenance, and parts
information for the 912N Series pressure regulators (Figure 1)
as used in industrial/natural gas applications.
The 912N Series pressure regulators are direct-operated,
spring-loaded devices built to provide accurate, sensitive
control suited to a variety of applications.
As outlet pressure begins to exceed the set pressure, the
diaphragm inside the regulator lifts, operating a lever to
close the inlet. Pressure in excess of the relief valve spring
force opens the relief valve, allowing excess pressure to
bleed through the screened vent in the spring case.
Specications for the 912N Series regulators are given on
page 2.
!
Like most regulators, the 912N Series regulators have an
outlet pressure rating lower than the inlet pressure rating.
Downstream protection is required if the actual inlet pressure
can exceed the regulator outlet pressure rating or the
pressure rating of any downstream equipment.
P1024
Figure 1. Type 912N Regulator
Comments to this Manuals