Emerson T208 Instruction Manual

T208 SeriesD103752X012Instruction ManualApril 2014logo herewww.fisherregulators.comT208 Series Tank Blanketing Vapor Recovery RegulatorsWARNING!Failu

T208 Series10Figure 6. Type T208 Assembly DrawingERSA02737APPLY LUBRICANT (L)(1):1. Lubricant must be selected such that they

T208 Series11Parts OrderingWhen corresponding with your local Sales Ofce about this regulator, include the type number and all other pertinent inform

T208 Series©Emerson Process Management Regulator Technologies, Inc., 2013, 2014; All Rights ReservedThe Emerson logo is a trademark and service mark o

T208 Series2The Specications section on this page provides the ratings and other specications for the T208 Series. Factory specication

T208 Series3Figure 3. Type T208M with External Registration Operational SchematicsFigure 2. Type T208 with Internal Registration Operational Schematic

T208 Series4InstallationWARNING!Personal injury, property damage, equipment damage or leakage due to containing p

T208 Series54. To remotely vent the regulator, remove the vent assembly (key 26) and install obstruction-free tubing or piping into the 1/4 NPT vent

T208 Series6For external square head adjusting screw1. Loosen the locknut (key 20).2. Turn the adjusting screw (key 35) either clockwise to increase

T208 Series78. Place the diaphragm casing (key 4) on the body (key 1). Secure the diaphragm casing to the body with the cap screws (key 2) using 90 t

T208 Series8 d. Closing cap (key 22) e. Locknut (key 20) f. Adjusting screw (key 35)11. Turn the adjusting screw (key 35) clockwise until there

T208 Series9Figure 5. Type T208M Section Drawing (External Registration)ERSA02738APPLY LUBRICANT (L)(1):L1 = SILICONE GREASETo