Emerson LK36 Owner's Manual download pdf

To avoid possible fire hazard, do not

exceed the wattage indicated on the

light fixture.

WARNING

Installation of Glass Shades

1. To install the shade (1), back the

knurled screws (2) out until the shade

neck slips into the holder (3) (Figure 6).

Then tighten the screws (2) until the

three screws touch the neck with

approximate equal projection on the

outside. Never use a screwdriver or

pliers to tighten screws against the

shade, or a broken or damaged shade

will most surely result.

NOTE: It is advisable to periodically

check the tightness of the knurled

screws. Fan operation may loosen

these screw.

2. CFSLK1 & CFSLKPF: Install a 100-

watt (maximum) medium base bulb into

the fixture socket.

All Other Models: Install a 60-watt

(maximum) medium base bulb into each

fixture socket.

Ceiling Fan Light Fixture

Owner's Manual

LIMITED WARRANTY

What The Warranty Covers:

All products covered by this Owner’s Manual are warranted against all defects in workmanship and materials. You must be the original purchaser or user of the

product to be covered.

What The Period Of Coverage Is:

All components are covered by this warranty for one year from the date you purchased your light fixture. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE, MADE WITH RESPECT TO COMPONENTS AND ACCESSORIES IS ALSO LIMITED TO ONE YEAR.

What Will Emerson Electric Co. Do To Correct Problems:

Emerson Electric Co. will replace a defective Emerson Light Fixture at no charge to you. WE WILL SHIP THE REPAIRED PRODUCT OR REPLACEMENT TO YOU AT

NO CHARGE, BUT YOU ARE RESPONSIBLE FOR ALL COSTS OF REMOVAL, REINSTALLATION AND SHIPPING OF THE PRODUCT TO EMERSON.

How Can You Get Service:

YOU MUST HAVE PROOF OF YOUR PURCHASE OF THE LIGHT FIXTURE TO OBTAIN LIMITED WARRANTY SERVICE. KEEP YOUR RECEIPT OR OTHER PROOF

OF PURCHASE. You can return the product to our factory or to your nearest authorized service center.

• To return the product to the factory, obtain a return authorization and service identification tag by writing to Air Comfort Products, Division of Emerson

Electric Co., 8100 W. Florissant Ave., St. Louis, MO 63136. Include all model numbers shown on the product with your request.

• To return the product to an authorized service center, call 1-800-654-3545 for the address of the nearest authorized service center.

You will be responsible for all insurance, freight or other transportation charges to our factory or authorized service center. Your Emerson Light Fixture should

be properly packed to avoid damage in transit since we will not be responsible for any such damage.

What Is Not Covered:

This warranty also does not cover any defects, malfunctions or failures caused by:

• Repairs by persons not authorized by Emerson Electric Co.,

• Use of parts or accessories not authorized by Emerson Electric Co.,

• Mishandling, improper installation, modifications or damage to your light fixture while in your possession, or

• Unreasonable use, misuse, abuse, including failing to do reasonable and necessary maintenance, and normal wear and tear.

Additionally, this warranty and any implied warranty of merchantability or fitness for a particular purpose are voided when:

• The original purchaser or user ceases to own the product, or

• The ceiling fan is moved from its original point of installation.

This warranty is only valid within the 50 states of the United States and the District of Columbia. No other written or oral warranties apply, and no employee,

agent, dealer or other person is authorized to give any warranties on behalf of Emerson Electric Co..

REPAIR, REPLACEMENT OR A REFUND ARE THE EXCLUSIVE REMEDIES AVAILABLE UNDER THIS WARRANTY AND EMERSON IS NOT RESPONSIBLE FOR

DAMAGES OF ANY KIND, INCLUDING INCIDENTAL AND CONSEQUENTIAL DAMAGES. Incidental damages include but are not limited to such damages as loss

of time and loss of use. Consequential damages include but are not limited to the cost of repairing or replacing other property which was damaged if this

product does not work properly.

How State Law Relates To The Warranty:

Some states do not allow the exclusion or limitation of incidental or consequential damages so the above exclusion or limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Part No. BP7130-8

Form No. F40BP71300008

Form No. F40BP71300008 Part No. BP7130-8

U.L. Model No.: CFMLK4, LK36, CFSLK1, CFSLKPF, CFFC4, F440, F460, F465, F330

Printed in China 03/09

READ AND SAVE THESE INSTRUCTIONS

USE THESE FIXTURES ONLY WITH

EMERSON CF AND F SERIES CEILING FANS.

THIS OWNER’S MANUAL

COVERS THE CF AND LK SERIES

LIGHT FIXTURES AND THE

CF AND F SERIES LIGHT FITTERS

4. Insert the black and white wires through

the lockwasher (8) and hex nut (7)

supplied. Firmly tighten the hex nut to

secure the light kit fixture to the switch

housing cover (5).

5. Carefully locate the white and blue

wires (labeled either “L” or “LIGHT”) in

the switch housing and remove the wire

connectors (3) from the wires.

6. Connect the white wire from the ceiling

fan to the white wire of the light fixture.

Connect the blue wire from the ceiling

fan to the black wire of the light fixture.

Use listed wire connectors (3) provided

to make connections. (Figures 4 and 5.)

7. Carefully tuck all wires and splices into

the switch housing (1). (Figure 4.)

(1) GLASS

SHADE

(2) KNURLED SCREW

(3 PER SHADE)

(3) HOLDER

LIGHT BULB

(1 PER

SOCKET

Figure 6

NOTE: ANY LIGHT KIT OR FITTER AND GLASS

COMBINATION COVERED BY THIS MANUAL

WEIGHS 7.5 LBS. OR LESS.

4. Installation is complete. Turn on power

at main fuse or circuit breaker box.

To avoid possible electrical shock,

be careful not to pinch the wires

between the switch housing (1) and

the cover (5).

WARNING

Air Comfort Products

DIVISION OF EMERSON ELECTRIC CO.

8100 W. Florissant • St. Louis, MO 63136

For repair parts, phone:

1-800-654-3545

Figure 5

To avoid possible fire or electrical

shock, make certain no bare wire

strands are exposed outside wire

connectors.

WARNING

8. Attach the cover/light fixture (5)(6) to the

housing (1) using the two screws (2) that

were removed in step 2. (Figure 4.)

9. Proceed to “Installation of Glass

Shades” section.

1 2

Summary of Contents

Page 1 - USE THESE FIXTURES ONLY WITH

To avoid possible fire hazard, do notexceed the wattage indicated on thelight fixture.WARNING!Installation of Glass Shades1. To install the shade (1),

Page 2 - 1-800-654-3545

Figure 3To avoid possible fire or electricalshock, make certain no bare wirestrands are exposed outside wireconnectors. WARNING!11. Position the cup/l

Comments to this Manuals

No comments

Emerson LK36 Owner's Manual

Browse online or download Owner's Manual for Household fans Emerson LK36. Emerson LK36 Owner's Manual User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Household fans Emerson LK36