Emerson CF930WW01 User Manual

111 -1 1

10SW101 FAN/LIGHT WALL CONTROL (SUPPLIED)BLACKBLACKWHITEREDBLACKWHITEHANGER BALLGREEN WIRE (GROUND) FROM HANGER BALL AND HANGER BRACKETTWO-CONDUCTORCA

Do not connect any neutral (white) wire tothis control. Incorrect wiring will damagethis control.!WARNING12Installation of WallControlSINGLE-POLE INST

5. Connect one black wire of the wallcontrol to both remaining traveler wiresin the wall box and secure with wireconnector supplied.NOTE: Retrofit 3-w

14STANDARD WIRING FOR EXISTING3-WAY CONTROL:HOTBLKFAN/LIGHTWALL CONTROLBLKTRAVELER WIRESBLKBLKBLACKLOADBLACKLOADTRAVELER WIRESHOT BLKEXISTINGWALL CON

1. Downrod Extension Kits (see store orcatalog).2. Ceiling Fan Controls (see store orcatalog).3. Blades (see store or catalog).15Do not use water when

-1-1-1762670-5 762670-5762670-5

18Trouble ShootingTROUBLE PROBABLE CAUSE SUGGESTED REMEDY1. Fan will not 1. Fuse or circuit breaker 1. Check main and branchstart. blown. circuit fu

19LIMITED WARRANTYWhat The Warranty Covers:This warranty covers the motor and the other components and accessories of your Emerson Electric Co. ceilin

YL

-11

Suppliedl.Two 60-watt candelabra bulbs

kl

5Your new ceiling fan will require agrounded electrical supply line of 120 voltsAC, 60 Hz, 15 amp circuit.The outlet box must be securely anchoredand

61. Remove the hanger ball by looseningthe setscrew in the hanger ball until theball falls freely down the downrod(Figure 1). Remove the clevis pin fr

92. Carefully lift the fan and seat thehanger ball/downrod assembly on thehanger bracket that was just attachedto the outlet box (Figure 12). Be suret