Part No. F40BP74160000 Form No. BP7416READ AND SAVE THESE INSTRUCTIONSCeiling Fan/LightReceiver & Reverse ModuleOwner's ManualReceiver Model
5. For Ceiling Fan Models CF1, CF2000and CF2800 Only. Locate the graycapacitor wire which is connected tothe yellow wire (gray wire on oldermodels) co
WIRE CONNECTORREVERSINGMODULECOLOR-CODED MOTOR CONNECTORWHITEREVERSING MODULE WIREWHITE MOTOR WIRECOLOR-CODED REVERSING MODULE CONNECTORBLUE MOTOR &am
17. Pull the wire leads, coming from theend of the downrod, and the supplywires through the open side of thehanger bracket. (Figure 18).18. Position t
1319. Using wire connectors (supplied),make wiring connections as follows(Figure 18 and 19):a. Connect the green ground wiresfrom the hanger bracket a
20. Insert the connected ends of the wiresup through the open side of thehanger bracket and into the outlet boxas shown in Figure 20.21. Screw two 1-1
15LIMITED WARRANTYWhat The Warranty Covers:All products covered by this Owner’s Manual are warranted against all defects in workmanship andmaterials.
Part No. F40BP74160000 Printed in China 10/09 Form No. BP7416Air Comfort ProductsDIVISION OF EMERSON ELECTRIC CO.8100 W. Florissant • St. Louis, MO 6
2Safety InstructionsWARNING: To avoid fire, shock, and serious personal injury, follow all instructionscarefully.1. Read your Owner's Manual care
GeneralYour Emerson Ceiling Fan/Light SR600Remote Control consists of hand-heldtransmitter and a receiver which ismounted under the fan ceiling cover.
GeneralYour Emerson Ceiling Fan/Light SR650Remote Control consists of hand-heldtransmitter with wall mount and a receiverwhich is mounted under the fa
getting interference from other remoteunits such as garage door openers, caralarms or security systems. To remedy thissituations, simply change the co
Figure 5Setting OperatingFrequency of SW605Wall ControlYour wall control has code switches whichmust be set in one of 32 possible codecombinations (Fi
7. The wall control is supplied with awhite, ivory, and almond color switchcovers. Choose the finish that bestsuits your needs and snap the coveronto
3-WAY WIRlNG DIAGRAM:NEW CONSTRUCTION6. Screw wall control into wall box usingthe supplied screws. Leave wallcontrol in “OFF” mode until faninstallat
4. If airflow is desired in the oppositedirection, press the ( ) button on thewall control. The fan must be operatingat any speed for the reverse b
Comments to this Manuals