Emerson CF205GES01 Owner's Manual

Part No. F40BP73750001 Form No. BP7375-1U.L. Model No.: CF205READ AND SAVE THESE INSTRUCTIONSNet Weight: 22.1 Lbs.HIGHPOINTE™Ceiling FanOwner's

Check to see that all connections aretight, including ground, and that nobare wire is visible at the wire con-nectors, except for the ground wire.Do n

8. Place the lower glass into the light fitter,aligning the three flat areas on the topflange of the lower glass with the threepins on the inside of t

12U.L. Model No.: CF205How to Disassemble Your Light Kit forCover Plate Assembly Only3. Cut light socket wires using wire cut-ters. Unscrew the screws

13U.L. Model No.: CF205LIGHT KIT PLATELIGHT KIT COVER PLATEFLAT AREALIGHT KIT PLATE SOCKETS REMOVEDFigure 245. Place the cover plate onto the fanmotor

14U.L. Model No.: CF205Setting OperatingFrequency ofTransmitterYour remote control transmitter has codeswitches which must be set in one of 32possible

15U.L. Model No.: CF205Do not use water when cleaning yourceiling fan. It could damage themotor or the blades and create thepossibility of an electric

16U.L. Model No.: CF205Trouble ShootingTROUBLE PROBABLE CAUSE SUGGESTED REMEDY1. Fan will not 1. Fuse or circuit breaker 1. Check main and branchsta

17U.L. Model No.: CF205INSTRUCTION TO THE USER(if device contains a digital device)This equipment has been tested and found to comply with the limits

U.L. Model No.: CF205Repair Parts32154261415671717161892311282782513102019222421221218BP7375-1 Highpointe 8/19/10 2:50 PM Page 18

U.L. Model No.: CF205Part NumbersKey Model No. Model No.No. Description CF205BS00 CF205GES00* Hanger Pack,Consisting of: 761655-74 761655-391 Hanger B

WARNING: To avoid fire, shock, and serious personal injury, follow these instruc-tions.Safety Instructions1. Read your owner’s manual carefully and ke

Part No. F40BP73750001 Printed in China 08/10 Form No. BP7375-1Air Comfort ProductsDIVISION OF EMERSON ELECTRIC CO.8100 W. Florissant • St. Louis, MO

3Tools Needed for AssemblyOne Phillips head screwdriverOne wire stripperOne stepladderOne wire cutterMaterialsWiring, outlet box and box connectorsmus

2. Remove the fan motor/housingassembly from the protective plasticbag. Place the fan assembly into thelower foam pad with the bottom of themotor faci

4. Connect the white wire from the light kitplate to the white wire in the fan motor/housing assembly (Figure 6). Connectthe black wire from the light

6DOWNRODMOTOR COUPLINGHAIRPINCLIPCLEVIS PINSETSCREW (2)REVERSE SWITCHFigure 96. Carefully remove the fan assemblyfrom the lower foam pad. Turn the fan

13. Slide the rod support assembly upthe downrod until the threaded holes inthe rod support align with theholes in the decorative rod assemblies(Figur

81. Securely attach the hanger bracket tothe outlet box using the two screwssupplied with the outlet box (Figure 15).15. Place the ceiling cover over

1. Position the supply wires to the left sideof the outlet box (Figure 17); positionthe fan wires to the right side. Partiallyinsert the remote contro