Emerson CCM901 Troubleshooting Guide download pdf (Page 12)

11

OPERATION

Place a cup on the Drip T ray Shelf and

with the Steam control set to OFF,

press the Espresso ON/OFF button 1

to the in ( ) position; the

orange Power indicator will light. Press

the Espresso/Cappuccino button 2 to

the Espresso ( ) position.

1

2

3

Press the Pump button to the STOP

( ) position until the green

Heat indicator lights then press the

Pump button to the PUMP

( ) position to start the

brewing.

4

MAKING ESPRESSO

Follow the instructions below to make espresso:

Preheat the unit as shown on the

previous page. Open the tank cover

and fill with cold water as desired.

Insert Espresso Filter into the

Espresso Handle. Add coffee

grounds to Espresso Filter with the

measuring spoon. Pack (tamp) the

espresso firmly using the back of the

measuring spoon. A spoon of coffee

grinds can make a cup of top-grade

espresso, but you can adjust as

desired.

1

Pull the Thumb Bar so it is against the

handle. Insert Espresso Filter into the

Espresso Handle and push the

Thumb Bar to hold the Espresso

Handle in place. Make sure the handle

on the Espresso Handle aligns with

the arrow (next to the word, INSERT)

on the maker, then release the Thumb

Bar and insert the Espresso Handle

into place. Lock it into the maker by

turning it counterclockwise until it is in

the ‘lock’ position.

2

2

1

5

When the espresso brewing is

completed, press the Pump button

1 to the STOP ( ) position

and Espresso ON/OFF button 2 to

the out ( ) position; the

orange Power and green Heat

indicators will turn off.

STOP

STOP

OFF

ON

PUMP/

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments