Emerson MS3105 Owner's Manual download pdf (Page 35)

7.) Insert the tip of the anchor into each hole and use a hammer to tap the anchors

all the way in until they are flush with the wall surface.

8.) Insert the screw into the anchor and tighten the screw until it touches the collar

on the anchor. This causes the anchor to spread inside the wall and locks the

anchor in place.

9.) Loosen the screw until there is a gap about 1/8" between the screw head and

the wall.

MS3105_120503.p65 5/12/2003, 12:0334

1 2 ... 30 31 32 33 34 35 36 37 38 39

No comments

Emerson MS3105 Owner's Manual Page 35