Emerson 210-2000 User Manual download pdf

Carbon Dioxide Sensor

Product Information Sheet

210-2000

Overview

CPC’s CO

sensor (P/N 210-2000) is a non-dispersive

infrared analyzer designed for measuring

environmental CO

concentration in ventilation

systems and indoor spaces. Its measurement range of

0-2000 or 0-5000 ppm covers the range required to

monitor compliance with ASHRAE and other

ventilation efficiency standards.

An LCD display is available to provide local indication

of CO

concentration and facilitate the setup and

calibration process. An adjustable setpoint relay is

available for direct control and alarm applications.

Microprocessor-based digital electronics and a

unique self-calibration algorithm improves long-term

stability and accuracy

Mounting

Before mounting, remove the door from the circuit

board by pressing a screwdriver against the locking

tab on the top of the enclosure. Pry the circuit board

away from the mounting plate using a screwdriver

inserted into the two tab slots on the top of the

enclosure.

Choose a location for the sensor with good air

circulation, away from ventilation inlets, doors,

windows, or other points where fresh air enters the

room. The sensor should be mounted at least 4-1/2

feet above the floor. The environment temperature

must be within 32°–112°F (0°–50°C).

If wiring will be coming in through the mounting

plate from the back, punch out openings in the

mounting plate and use the plate as a template for

locating holes. Mount the mounting plate against a

wall or other flat surface by using the two mounting

holes and the screws provided (use wall anchors for

drywall installations).

NOTE: Sensors must be mounted vertically (straight

up and down) to ensure proper readings.

Figure 1 - CO

Sensor (exploded view)

Carbon Dioxide Sensor

Product Information Sheet

1 2 3 4

Summary of Contents

Page 1 - Product Information Sheet

Carbon Dioxide Sensor Product Information Sheet 210-2000 Overview CPC’s CO2 sensor (P/N 210-2000) is a non-dispersive infrared analyze

Page 2 - Carbon Dioxide Sensor

Carbon Dioxide Sensor Product Information Sheet 210-2000 Wiring The mounting plate has two sets of three-terminal connectors. The con

Page 3

Carbon Dioxide Sensor Product Information Sheet 210-2000 Setting the Volts/Amps Switch The front of the circuit bo

Page 4

Carbon Dioxide Sensor Product Information Sheet 210-2000 Span The Span parameter determines whether you want to measure concentration

Comments to this Manuals

No comments

Emerson 210-2000 User Manual

Browse online or download User Manual for Car alarm Emerson 210-2000. Emerson 210-2000 User Manual

Summary of Contents

Comments to this Manuals